Dan"/>

Metroplex Mortgages

Jump to content.

Transmission Boiler

The secret of the electrode boilers is simple, as all ingenious – under the influence of electric water molecules (or other coolant) are split into positive and negative ions, which emit heat. AC Transmission current can not be called electrolysis, since there is only the ionization of the liquid, the oscillation frequency of ions from industrial and 50 Hz heating fluid (electrolysis and the electrode material transfer takes place only at a constant current). Electrode boilers economical TENovyh at least 20 – 30%. Energy efficiency of electrode boilers tested practice installation and operation for over 12 years. In the first heat boiler heating elements heating elements, heating elements and then their surface of the liquid give off heat. In an electrode boiler itself plays the role of the heater fluid. When a current is passed, the liquid heats the entire volume, located in the boiler. Using the electrode heating fluid can be reduced volume of the boiler several times over TENovyh the same power.

Capacity of the electrode boiler depends on the temperature of the liquid flowing into it, and can be selected by an automatic, depending on changes in weather conditions. At well-designed system, the boiler will start with low power (less than 50% of rated capacity), and by heating slowly gaining power rating. Modern automation allows you to maintain a comfortable temperature in a room with an accuracy of 0,2 C. Thus energy conservation in the electrode boiler is achieved through: 1. less inertia heating (several times) 2.

Sorry, the comment form is closed at this time.


Read more

«
»